CCNA Security  Training Course Training 課程
  Facebook: CCNA Security  Training Course Training 課程
 
CCNA Security  Training Course Training 課程
CCNA Security  Training Course Training 課程 CCNA Security  Training Course Training 課程 CCNA Security  Training Course Training 課程 CCNA Security  Training Course Training 課程 CCNA Security  Training Course Training 課程 CCNA Security  Training Course Training 課程 CCNA Security  Training Course Training 課程 CCNA Security  Training Course Training 課程 CCNA Security  Training Course Training 課程 CCNA Security  Training Course Training 課程 CCNA Security  Training Course Training 課程  
CCNA Security  Training Course Training 課程 CCNA Security  Training Course Training 課程

想定期知道最新課程及優惠嗎?
免費訂閱本中心的課程通訊!

課堂錄影隨時睇 10 大優點之地點方便:本中心位於旺角、觀塘、北角、沙田及 屯門,就近港鐵站!

CCNA Security 國際認可證書課程
課程簡稱:CCNA Security Training Course

  • 課程時間
  • 課程簡介
  • 課程特點
  • 考試須知
  • 課程器材
  • 課程內容

關於本課程之相關考試及實習:

Cisco 已停止提供本課程的相關考試;本中心已停止提供本課程的相關實習給學員親自進行。

雖然學員已不能應考本課程的相關考試及親自進行實習,
但學員仍能透過本課程所學的知識及實習 (由導師進行),廣泛地應用於工作上。

而本中心更為本課程提供六折的特別優惠,原價 HK$4,480,現只須 HK$2,688 便可!


課程優惠!現凡同時報讀以下兩個課程:
即減 $1,000!

推介服務:課堂錄影隨時睇 (在家觀看 = 0%,在校觀看 = 100%)
學員使用電話或本網頁報名,待本中心確認已為學員留位後,即可使用 轉數快 繳付學費,過程簡便!
編號 地點 可預約星期及時間 學費低至 85 折  
FA2403MV 旺角 一至五:14:30 - 22:15   六:13:45 - 21:30   日:10:15 - 18:00 (公眾假期休息) 95 折後只需 $2,554 按此報名:CCNA Security  Training Course Training 課程
FA2403OV 觀塘 一至五:14:15 - 22:00   六及日:12:15 - 20:00   (星期三及公眾假期休息) 9 折後只需 $2,419 按此報名:CCNA Security  Training Course Training 課程
FA2403PV 北角 一至五:14:15 - 22:00   六及日:12:15 - 20:00   (星期三及公眾假期休息) 9 折後只需 $2,419 按此報名:CCNA Security  Training Course Training 課程
FA2403SV 沙田 一至五:14:15 - 22:00   六及日:12:15 - 20:00   (星期三及公眾假期休息) 85 折後只需 $2,285 按此報名:CCNA Security  Training Course Training 課程
FA2403YV 屯門 一至五:14:15 - 22:00   六及日:12:15 - 20:00   (星期一、三及公眾假期休息) 85 折後只需 $2,285 按此報名:CCNA Security  Training Course Training 課程
* 各政府部門可使用 P Card 付款  
如使用 P Card 繳付考試費,考試費需另加 1.3% 附加費  
在校免費試睇: 首 1 小時,請致電與本中心職員預約。 查看各地點電話
旺角 2332-6544
觀塘 3563-8425
北角 3580-1893
沙田 2151-9360
屯門 3523-1560
在校免費重睇: 學員可於享用時期內於報讀地點不限次數地重看課堂錄影,從而可反覆重溫整個課程!
導師解答: 學員可於觀看某一課堂錄影後提出課堂直接相關的問題,課程導師會樂意為學員以單對單的形式解答!
課時: 36 小時 (18 小時課堂 + 18 小時於家中透過上網來控制本中心的器材及軟件,並依照筆記來進行實習)
享用時期: 6 星期 (可於報讀日至 4 星期內觀看整個課程,另加 2 星期備用時期)。進度由您控制,可快可慢。
課堂錄影導師: Franco (任教課程清單)
在校觀看: 詳情及示範片段


推介服務:課堂錄影隨時睇 (在家觀看 = 100%,在校觀看 = 0%)
學員使用電話或本網頁報名,待本中心確認已為學員留位後,即可使用 轉數快 繳付學費,過程簡便!
編號 地點 星期及時間 費用  
FA2403HH 在家 享用時期內每星期 7 天 (包括公眾假期),每天 24 小時全天候不限次數地觀看。 $2,688 按此報名:CCNA Security  Training Course Training 課程
* 各政府部門可使用 P Card 付款  
如使用 P Card 繳付考試費,考試費需另加 1.3% 附加費  
在校免費試睇: 首 1 小時,請致電與本中心職員預約。 查看各地點電話
旺角 2332-6544
觀塘 3563-8425
北角 3580-1893
沙田 2151-9360
屯門 3523-1560
導師解答: 學員可於觀看某一課堂錄影後提出課堂直接相關的問題,課程導師會樂意為學員以單對單的形式解答!
課時: 36 小時 (18 小時課堂 + 18 小時於家中透過上網來控制本中心的器材及軟件,並依照筆記來進行實習)
在家觀看時禁用程式: 一些危害課堂錄影版權的程式。
享用時期: 6 星期 (可於報讀日至 4 星期內觀看整個課程,另加 2 星期備用時期)。進度由您控制,可快可慢。
課堂錄影導師: Franco (任教課程清單)
在家觀看: 服務條款及守則、報讀程序及示範片段


地區 地址 電話 教育局註冊編號
旺角 九龍旺角亞皆老街 109 號,皆旺商業大廈 18 樓 1802 - 1807 室 2332-6544 533459
觀塘 九龍觀塘成業街 7 號寧晉中心 12 樓 G2 室 3563-8425 588571
北角 香港北角馬寶道 41-47 號華寶商業大廈 3 樓 01-02 號舖 3580-1893 591262
沙田 新界沙田石門安群街 3 號京瑞廣場 1 期 10 樓 M 室 2151-9360 604488
屯門 新界屯門屯喜路 2 號屯門柏麗廣場 17 樓 1708 室 3523-1560 592552
注意! 客戶必須查問報讀學校的教育局註冊編號,以確認該校為註冊學校,以免蒙受不必要的損失!


最新內容:緊貼 CCNA Security 考試 210-260,並由 Franco Tsang (CCIE #19772) 親自教授,信心保證!


Cisco Systems Inc. 是全球最大的網路設備生產商,在世界各地設有 120 個以上的分支據點。Cisco 的產品包括 Switch (交換器)、LAN Router (區域網路由器)、WAN Router (廣域網路由器)、IOS (Internetwork Operating System) 網路管理操作系統、ASA (Adaptive Security Appliances)、IPS (Intrusion Prevention System) 等。全球的大企業、銀行、大學和政府機構之網路設備,無一不採用 Cisco 的產品,因此,管理 Cisco 網路設備便成為一門專業的學問。

為了能證明你有專業水準來安裝、設定及管理 Cisco 的網路安全產品,Cisco 便推出其 CCNA Security (Cisco Certified Network Associate - Security,Cisco 認可網路夥伴 – 網路安全 ) 國際認可考試。本中心的 CCNA Security 課程由 Franco Tsang (擁有 CCIE : Security, CCIE : Service Provider 及 CCIE : Routing and Switching 三項 CCIE 證書) 籌備多時,精心編排。由上堂、溫習、實習、考試研習、做試題至最後考試,均為你度身訂造,作出有系統的編排。務求真正教識你,又令你考試及格。


本課程緊貼時代需要,相關的概念 / 內容 / 產品能被應用到不同的情景中,例如:


課程名稱: CCNA Security 國際認可證書課程
- 簡稱:CCNA Security Training Course
課程時數: 合共 36 小時
課堂 18 小時 (共 6 堂) 及實習時段 18 小時 (共 6 節)
適合人士: 具備 CCNA 知識的人士
授課語言: 以廣東話為主,輔以英語
課程筆記: 本中心導師親自編寫英文為主筆記,而部份英文字附有中文對照。

1. Franco Tsang (CCIE #19772) 親自教授: Franco 善於控制學習節奏,深入淺出,令學員在輕鬆氣氛下,掌握電腦技巧。
2. Franco Tsang 親自編寫筆記: Franco 親自編寫筆記,絕對適合考試及實際管理網路之用,令你無須「死鋤」如字典般厚及不適合香港讀書格調的書本。
3. 提供模擬考試題目: 本中心為學員提供充足的模擬考試題目,每條考試題目均附有標準答案。而較難理解的題目,均會附有 Franco 的解釋。
4. 理論與實習並重: 本中心的 CCNA Security 課程為全港時數最長,合共 36 小時,令學員真正了解及掌握課程內容。
a. 其中 18 小時課堂由導師教授理論及進行眾多的商業實習。
b. 另加 18 小時實習時段,由學員於家中透過上網來控制本中心的 ISR、Switches、Cisco ACS 和 Test PC,來親自實踐眾多的商業實習。
 

註: ISR 的全名為 Integrated Services Routers (集成服務路由器),意指能將下列服務集結於一身:
1. Routing
2. Security and VPN
3. Voice
4. Wireless
5. Optimization of network bandwidth and applications (意即實施 QoS,Quality of Service)

而整套器材會於 18 小時實習時段內由你一個人完全操控,無須與其他學員共用。如有須要,學員更可申請額外的實習時段,費用全免。
c. 此外,本中心還會安排 Router and Switch Simulation Software (模擬軟件),來讓學員於家中隨時地進行模擬實習。

請謹記: 充足的理論及實習時間是成功的重要因素!
5. 免費重讀: 傳統課堂學員可於課程結束後三個月內免費重看課堂錄影。

只要你於下列科目取得合格成績,以及擁有有效的 CCNA 證書,便可獲 Cisco 頒發 CCNA Security 國際認可證書:

考試編號 科目名稱

210-260

Implementing Cisco Network Security (IINS)


本中心為 Cisco 指定的 CCNA Security 考試試場,報考時請致電本中心,登記欲報考之科目考試編號、考試日期及時間 (最快可即日報考)。

臨考試前要繳付考試費 HK$2,348,及必須出示下列兩項有效之身份證明文件,否則考生不可進行考試,而已繳付之考試費亦不會退回:
1. 香港身份證   及
2. 附有考生姓名及簽名的證件 (如信用咭、香港特區護照、BNO 等)

考試題目由澳洲考試中心傳送到你要應考的電腦,考試時以電腦作答。所有考試題目均為英文,而大多數的考試題目為單項選擇題 (意即 O) 或多項選擇題 (意即 口),其餘則為配對題及實戰題。作答完成後會立即出現你的分數,結果即考即知!考試不合格便可重新報考,不限次數。欲知道作答時間、題目總數、合格分數等詳細考試資料,可瀏覽本中心網頁 "各科考試分數資料"。




為進一步加強本中心 Cisco 的課程質素,本中心投放大量資源購買 Cisco 器材,以供學員進行實習。以下是本中心擁有的 Cisco 器材 (種類繁多,未能盡錄):


CCNA Security Course Training CCNA Security Course Training
Cisco Router 800 Series (ISR)
Cisco Router 2500 Series

   
CCNA Security Course Training CCNA Security Course Training
Cisco Router 2600 Series Cisco Router 2800 Series (ISR)
   
CCNA Security Course Training CCNA Security Course Training
Cisco Router 2900 Series (ISR) Cisco Router 3600 Series
   
CCNA Security Course Training CCNA Security Course Training 
Cisco Router 3800 Series (ISR)  Cisco Router 4000 Series
   
CCNA Security Course Training CCNA Security Course Training
 Cisco Catalyst Switch 1900 Series Cisco Catalyst Switch 2950 Series
   
CCNA Security Course Training CCNA Security Course Training
Cisco Catalyst Multilayer Switch 3550 Series Cisco Catalyst Multilayer Switch 3560 Series
   
CCNA Security Course Training CCNA Security Course Training

Cisco Catalyst Multilayer Switch 3560X Series

Cisco Catalyst Multilayer Switch 3750G Series
   
CCNA Security Course Training CCNA Security Course Training
Cisco Catalyst Multilayer Switch 3750X Series Cisco Catalyst Multilayer Switch 5000 Series
   
CCNA Security Course Training CCNA Security Course Training
Cisco PIX Firewall Cisco LightStream 1010 ATM Switch
   
CCNA Security Course Training CCNA Security Course Training
Cisco ATM Module Cisco FXS Voice Module 
   
CCNA Security Course Training CCNA Security Course Training
Cisco IP Phone 7911G Cisco Wireless LAN Controller 2106 
   
CCNA Security Course Training CCNA Security Course Training
Cisco Aironet Lightweight Access Point 1130AG PSTN Simulator
   
CCNA Security Course Training CCNA Security Course Training
ISDN Simulator Cisco ASA 5505
   
CCNA Security Course Training CCNA Security Course Training
Cisco ASA 5510 Cisco ASA 5512X
   
CCNA Security Course Training  
Cisco IPS 4210  



課程名稱:CCNA Security 國際認可證書課程
- 簡稱:CCNA Security Training Course


1 Security Concepts
1.1 Common security principles
1.1.1 CIA Triad
1.1.1.1 Confidentiality
1.1.1.2 Integrity
1.1.1.3 Availability
1.1.2 SIEM
1.2 Common security threats
1.3 Cryptography concepts
1.3.1 Encryption and decryption
1.3.2 Symmetric encryption
1.3.3 Asymmetric encryption
1.3.4 Comparison between symmetric and asymmetric encryption
1.3.4.1 Key management of symmetric and asymmetric encryption
1.3.5 Diffie-Hellman (DH) key exchange
1.3.6 Hash
1.3.7 Digital signature
1.3.8 Digital certificate
1.3.9 Public key infrastructure (PKI)
1.3.10 TPM
1.4 Network topologies
1.4.1 Campus area network (CAN)
1.4.2 Wide area network (WAN)
1.4.2.1 MPLS
1.4.2.2 Metro Ethernet
1.4.3 Data center
1.4.4 SOHO
1.4.5 Network security for a virtual environment
1.4.5.1 IaaS and PaaS

2 Secure Routing and Switching
2.1 CDPv1 vulnerabilities
2.2 CAM overflow and MAC spoofing
2.2.1 CAM overflow
2.2.2 MAC spoofing
2.2.3 Dynamic port security
2.2.4 Lab: dynamic port security
2.2.4.1 Lab topology
2.2.4.2 Lab goal
2.2.4.3 Lab procedure
2.3 CoPP and CPPr
2.3.1 Control plane and data plane
2.3.1.1 Data plane
2.3.1.2 Control plane
2.3.2 CoPP
2.3.2.1 Lab: CoPP
2.3.2.1.1 Lab topology
2.3.2.1.2 Lab goal
2.3.2.1.3 Lab procedure
2.3.3 CPPr
2.3.3.1 Virtual control plane categories
2.3.3.2 Lab: CPPr
2.3.3.2.1 Lab topology
2.3.3.2.2 Lab goal
2.3.3.2.3 Lab procedure
2.4 Neighbor authentication in routing protocols
2.4.1 Plain text and MD5 authentication
2.4.2 Lab: Neighbor authentication in OSPF
2.4.2.1 Lab topology
2.4.2.2 Lab goal
2.4.2.3 Lab procedure
2.4.3 Lab: Neighbor authentication in EIGRP
2.4.3.1 Lab topology
2.4.3.2 Lab goal
2.4.3.3 Lab procedure
2.5 VLAN security and private VLAN
2.5.1 VLAN Hopping
2.5.1.1 802.1Q or ISL Tagging Attack
2.5.1.2 Double-encapsulated 802.1Q
2.5.2 Private VLAN
2.5.2.1 Without private VLAN
2.5.2.2 Introduction to private VLAN
2.5.2.2.1 Isolated VLAN
2.5.2.2.2 Community VLAN
2.6 DHCP snooping and DAI
2.6.1 DHCP snooping
2.6.1.1 DHCP
2.6.1.2 Threats
2.6.1.3 DHCP snooping
2.6.1.4 DHCP snooping binding database
2.6.2 DAI
2.6.2.1 Basic ARP review
2.6.2.2 ARP spoofing
2.6.2.3 DAI and ARP spoofing
2.7 Multiple privilege levels
2.7.1 Lab: Multiple privilege levels
2.7.1.1 Lab topology
2.7.1.2 Lab goal
2.7.1.3 Lab procedure
2.8 NTP
2.8.1 NTP and NTP authentication
2.8.2 Lab: NTP and NTP authentication
2.8.2.1 Lab topology
2.8.2.2 Lab goal
2.8.2.3 Lab procedure
2.9 uRPF
2.9.1 Introduction to uRPF
2.9.2 uRPF and asymmetric routing
2.9.3 Lab: uRPF and asymmetric routing
2.9.3.1 Lab topology
2.9.3.2 Lab goal
2.9.3.3 Lab procedure
2.10 BPDU guard
2.10.1 Without BPDU guard
2.10.2 How BPDU guard works
2.10.3 Lab: BPDU guard
2.10.3.1 Lab topology
2.10.3.2 Lab goal
2.10.3.3 Lab procedure
2.11 SPAN
2.11.1 Introduction to SPAN
2.11.2 Lab: SPAN
2.11.2.1 Lab topology
2.11.2.2 Lab goal
2.11.2.3 Lab procedure
2.12 secure boot-image
2.12.1 Lab: secure boot-image
2.12.1.1 Lab topology
2.12.1.2 Lab goal
2.12.1.3 Lab procedure
2.13 OOB and In-Band
2.13.1 OOB
2.13.2 In-Band
2.14 no switchport

3 Secure Access
3.1 AAA
3.1.1 Introduction to AAA
3.1.1.1 Authentication
3.1.1.2 Authorization
3.1.1.3 Accounting
3.1.2 Local AAA
3.1.2.1 Lab: Local AAA
3.1.2.1.1 Lab topology
3.1.2.1.2 Lab goal
3.1.2.1.3 Lab procedure
3.2 Cisco Secure ACS
3.2.1 Introduction to centralized secure access needs
3.2.2 TACACS+ and RADIUS
3.2.3 Install ACS
3.2.4 Lab: ACS
3.2.4.1 Lab: ACS: Remote management
3.2.4.1.1 Lab topology
3.2.4.1.2 Lab goal
3.2.4.1.3 Lab procedure
3.2.4.2 Lab: ACS: Configure routers to implement AAA with ACS
3.2.4.2.1 Lab topology
3.2.4.2.2 Lab goal
3.2.4.2.3 Lab procedure
3.2.4.3 Lab: ACS: Create users
3.2.4.3.1 Lab topology
3.2.4.3.2 Lab goal
3.2.4.3.3 Lab procedure
3.2.4.4 Lab: ACS: Configure TACACS server in a router
3.2.4.4.1 Lab topology
3.2.4.4.2 Lab goal
3.2.4.4.3 Lab procedure
3.2.4.5 Lab: ACS: Configure AAA authentication
3.2.4.5.1 Lab topology
3.2.4.5.2 Lab goal
3.2.4.5.3 Lab procedure
3.2.4.6 Lab: ACS: AAA Accounting
3.2.4.6.1 Lab topology
3.2.4.6.2 Lab goal
3.2.4.6.3 Lab procedure
3.3 EAP
3.3.1 Introduction to EAP
3.3.2 EAP-PEAP
3.3.3 EAP-FAST
3.4 ISE and BYOD
3.4.1 Introduction to ISE
3.4.2 Switch’s configurations under ISE environment
3.4.3 Default ACL
3.4.4 Order of authentication
3.4.5 Lost or stolen device

4 Firewall and IPS
4.1 Basic firewall concepts
4.1.1 Standard and extended access-list
4.2 Reflexive access lists
4.2.1 Lab: Reflexive access lists
4.2.1.1 Lab topology
4.2.1.2 Lab goal
4.2.1.3 Lab procedure
4.3 Stateful vs stateless
4.4 Zoned-based firewall
4.4.1 Lab: Zone-based firewall
4.4.1.1 Lab topology
4.4.1.2 Lab goal
4.4.1.3 Part 1: Topology building
4.4.1.4 Part 2: class map
4.4.1.5 Part 3: policy map
4.4.1.6 Part 4: Create zones and assign zones to interfaces
4.4.1.7 Part 5: Create a zone pair and assign a policy map to a zone pair
4.5 ASA
4.5.1 Basic configurations
4.5.1.1 Save configurations
4.5.1.2 Erase saved configurations
4.5.1.3 Erase all configurations
4.5.1.4 ASA interfaces
4.5.1.4.1 Physical switch ports
4.5.1.4.2 Logical VLAN interfaces
4.5.1.4.3 Security levels
4.5.1.4.4 Lab: ASA initialization and security levels
4.5.1.4.4.1 Physical lab topology
4.5.1.4.4.2 Logical lab topology
4.5.1.4.4.3 Lab goal
4.5.1.4.4.4 Lab procedure
4.5.2 Enable telnet in ASA
4.5.2.1 Lab: Telnet in ASA
4.5.2.1.1 Lab topology
4.5.2.1.2 Lab goal
4.5.2.1.3 Lab procedure
4.5.3 Application layer protocol inspection
4.5.3.1 Session management path
4.5.3.2 Default inspection
4.5.3.3 Deep inspection for HTTP traffic
4.5.3.3.1 Lab: Strict inspection for HTTP traffic
4.5.3.3.1.1 Lab topology
4.5.3.3.1.2 Lab goal
4.5.3.3.1.3 Lab procedure
4.5.4 Transparent mode
4.5.4.1 Introduction to transparent mode
4.5.4.2 Lab: Transparent mode
4.5.4.2.1 Lab topology
4.5.4.2.2 Lab goal
4.5.4.2.3 Lab procedure
4.5.5 ASDM
4.5.5.1 Introduction to ASDM
4.5.5.2 Lab: ASDM
4.5.5.2.1 Lab topology
4.5.5.2.2 Lab goal
4.5.5.2.3 Lab procedure
4.5.6 NAT
4.5.6.1.1 Lab: Static NAT
4.5.6.1.1.1 Lab topology
4.5.6.1.1.2 Lab goal
4.5.6.1.1.3 Lab procedure
4.5.7 Multiple Contexts
4.5.7.1 Introduction to multiple contexts
4.5.7.2 Appropriate moment to use multiple contexts
4.5.8 Failover
4.5.9 Hairpinning
4.6 IPS
4.6.1 IDS, IPS, HIPS and honeypot
4.6.1.1 IDS
4.6.1.2 IPS
4.6.1.3 HIPS
4.6.1.4 Honeypot
4.6.2 Alarms
4.6.3 Demonstration: IOS IPS
4.6.3.1 Demonstration topology
4.6.3.2 Demonstration goal
4.6.3.3 Demonstration procedure
4.7 Sourcefire and FirePOWER
4.7.1 Sourcefire
4.7.2 FirePOWER

5 VPN
5.1 IPsec site-to-site VPN
5.1.1 Introduction to IPsec site-to-site VPN
5.1.2 IPsec protocols
5.1.2.1 AH
5.1.2.2 ESP
5.1.3 Tunnel mode and transport mode
5.1.3.1 Tunnel mode
5.1.3.2 Transport mode
5.1.4 IKE
5.1.4.1 IKE phases
5.1.4.2 IKE configurations in Cisco IOS devices
5.1.4.3 IKE pre-shared key in Cisco IOS devices
5.1.5 Transform set
5.1.6 Lifecycle of IPsec VPN
5.1.7 Lab: Site-to-site IPsec VPN
5.1.7.1 Lab topology
5.1.7.2 Lab goal
5.1.7.3 Lab procedure
5.1.7.3.1 Part 1: Topology building
5.1.7.3.2 Part 2: IKE policy and pre-shared key
5.1.7.3.3 Part 3: Transform set
5.1.7.3.4 Part 4: Crypto ACL
5.1.7.3.5 Part 5: Crypto map
5.1.7.3.6 Part 6: Verification
5.2 SSL VPN
5.2.1 Introduction to SSL VPN
5.2.2 Lab: SSL VPN in ASA (through ASDM)
5.2.2.1 Lab topology
5.2.2.2 Lab goal
5.2.2.3 Lab procedure
5.2.2.3.1 Part 1: Topology building
5.2.2.3.2 Part 2: Enable ASDM in ASA
5.2.2.3.3 Part 3: Configure SSL VPN through ASDM
5.2.2.3.4 Part 4: Verification (Clients)
5.2.2.3.5 Part 5: Verification (ASA)
5.2.3 Split tunneling

6 Content and endpoint security
6.1 Proxy and WSA
6.1.1 Proxy
6.1.2 WSA
6.1.2.1 Introduction to WSA
6.1.2.2 WSA deployment
6.2 ESA
6.2.1 Introduction to ESA
6.2.2 Deployment and information flow
6.2.2.1 Inbound information flow
6.2.2.2 Outbound information flow
6.2.3 Spam blocking

7 Appendix 1: Lab physical topology

8 Appendix 2: Topology building by interVLAN routing

9 Appendix 3: Cisco Configuration Professional
9.1 Introduction to Cisco Configuration Professional
9.2 Lab: Connect to IOS router by Cisco Configuration Professional
9.2.1 Lab topology
9.2.2 Lab goal
9.2.3 Lab procedure

10 Appendix 4: Security Device Manager
10.1 Introduction to Security Device Manager
10.2 Lab: Security Device Manager
10.2.1 Lab topology
10.2.2 Lab goal
10.2.3 Lab procedure

11 Appendix 5: Logs of passed authentication in ACS

 

更多綜合課程
  攝影課程
  • 攝影初級
  • 攝影中級 (風景專題)
  英文課程
  • IPA 拼音:級別 1 2 3 4
  普通話課程
  • 基礎普通話拼音 (免費)
  • 進階普通話拼音
  • 普通話會話:級別 1 2 3
  西班牙語文課程
  • 級別 1 2 3
  中醫課程
  • 濕疹與皮膚敏感病
  • 暗瘡與色斑 | 鼻敏感與感冒
  • 脫髮與白髮 | 從五官看健康
  風水命理課程
  • 紫微斗數:級別 1 2 3
  • 子平八字:級別 1 2 3
  • 八字風水:級別 1 2 3
  • 奇門遁甲:級別 1 2 3